MEDIATEK BOOTLOADER UNLOCK WITH MTK CLIENT FOR ALL MTK DEVICES

today I will show you again about MTK CLIENT, this one tool maybe for those of you who understand program codes it will be very easy to do, because I myself do not understand program codes, mtk client functions to remove patterns / pin lock on your mediatek device, specifically today I will try a little about how to unlock the bootloader of the mediatek device mtk client, support for mediatek soc mt6765 and most recently, but you have to be able and just look at how

1. install the mtk auto driver installer and also libusbwin32 into your pc or laptop, after that you can disable the driver signature on your laptop or pc so that the device connection to the pc can run smoothly without a hitch, adjust to the windows system features that you are currently using, namely windows 32bit and 64bit windows, for the first step you just need to install the two files that I mentioned above and continue to the next step

2. Next you use libusbwin32 that you have installed, you can look for it in the libusbwin32 installation folder (local disk c \ program files \ libusbwin32 \ bin \ install-filter-win by running as administrator, continue by selecting next and now turn off your device then press both volume up+down buttons connect the device to the laptop and install the mtk usb port on the libusbwin32 interface until successfully

3. after you extract the mtk client file and other files, first you install python-3.10.0-amd64, proceed to the installation of UsbDk_1.0.22_x64 (for those who use 32bit windows, install this usbdk UsbDk_1.0.22_x86) until it's finished, it's important when install python-3.10.0-amd64 check the Add Python to Path checklist then you can continue to install python until it's finished

4. extract the mtk client which is still in the form of winrar which will generate a folder, you open the mtk client folder then on your windows address block the contents of the address then copy it, after the mtk client folder has been copied right, now you open windows start and run cmd.exe until the command prompt interface opens, at the command prompt we type (cd) then paste the mtk client folder and enter, after that it will be like this

MEDIATEK BOOTLOADER UNLOCK WITH MTK CLIENT FOR ALL MTK DEVICES

5. leave the command prompt still open, now we open the notepad code script, in it there is the first code like this python setup.py install and the script code like this pip3 install -r requirements.txt, we will install these two codes at the command prompt later it will be like this how to install it

a. python setup.py install then enter
b. pip3 install -r requirements.txt then enter

MEDIATEK BOOTLOADER UNLOCK WITH MTK CLIENT FOR ALL MTK DEVICES
and wait until the two script codes can be successfully installed on your laptop or PC, don't close your command prompt, continue with the next step

6. here there will be three options, among others (to reset data / format data / to unlock the bootloader and to relock the bootloader, you just choose according to your needs, for example we want our device to unlock the bootloader, you just copy and paste this script at the command prompt which is still open and has other scripts installed like this

MEDIATEK BOOTLOADER UNLOCK WITH MTK CLIENT FOR ALL MTK DEVICES
a. python mtk xflash seccfg unlock ( unlock bootloader )
b. python mtk e metadata,userdata,md_udc ( format data )
c. python mtk xflash seccfg lock ( relock bootloader )

MTK Client V1.4.0

Mediatek USB Driver Installer

LibusbWin32 Installer

0 Response to "MEDIATEK BOOTLOADER UNLOCK WITH MTK CLIENT FOR ALL MTK DEVICES"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel